How to Update Samsung Galaxy Y S5360 Firmware using Samsung Kies

1 comment
You can easily update your Samsung Smartphone easily with in built Software Update feature , but you must have Internet 3G  data pack or WiFi to do the same. There is another way to Update your Phone Software  that is via connecting your phone with your PC or laptop using USB data cable. In this post i am going to Give step by step procedure to Update your phone software using Samsung kies.

Step 1:

Download  the Samsung Kies Software  and install the same on your PC. It is of around 75 MB and will 5-10 minutes for downloading depending upon your Internet Bandwidth.
Follow this Link : http://www.samsung.com/in/support/usefulsoftware/KIES/JSP
Make sure that your PC must have at least 1 GB of RAM and 100 MB space. 
After Installing Launch the Software

Step 2:
Connect your Mobile/device with the PC or Laptop with the help of USB Data Cable. Kies Sofware will show the status as GT-S5360 as Connected Device at the top left corner. Also you will be notified about the Latest Software/firmware version available for your Phone as New Firmware is available  or if your Phone already have Latest firmware in it , It will Show 'This is the Latest Firmware'


Step 3:
Proceed with the Firmware Upgrade Option. It will start downloading  update File.
Note : It is Normal if you see Connection to your Device Lost during the process.



Step 4:
Proceed with the Steps. Following pop up  Windows will come as shown in screenshots below.Save the things like Phone number and other by Clicking on Allow saving and Click on start Upgrade Option.

Step 5:
Now the Kies will download the Firmware Upgrade Components. Make sure that you don't disconnect the  phone during this step.

Step 6:
 After this Step , You will Notice Downloading on Your Samsung Galaxy Y will appear . It will take 2-3 minutes and then your phone will restart.
Following these steps , you can easily Upgrade your Phone's Software easily. I hope this Post helped you. If you are facing any difficulty while Upgrading. please feel free to comment below, i will try to help you.:)


1 comment:

  1. Hi, I am trying to update my samsung S5360 using Kies. All steps are made, but in the last one (when in the phone appears "Downloading, do not turn off target!!"), the phone reconnects, then Windows tries to recognize it as "SAMSUNG Mobile USB CDC Composite Device", and device driver not found. Here the update stops and the screen phone contines with the last step. Thanks for your help

    ReplyDelete